Starting the X431 V+ PRO3 Diagnostics Tablet FAQ

 
Introduced LAUNCH X431 PRO3S+ HDIII for cars and trucks Full system diagnostic tool for 12V cars and 24V heavy duty trucks, 31+ reset functions, remote diagnosis, bidirectional control, 12 in 1 data flow, 5 years warranty, multiple supported languages+ Global version (available worldwide) + 32GB storage (expandable to 128GB), free updates for one year. They still work fine without the update.



 

Q1:How to save power?

>>Please turn off the screen while the tool keeps idle.

>>Set a shorter standby time.

>>Decrease the brightness of the screen.

>>If WLAN connection is not required, please turn it off.

>>Disable GPS function if GPS service is not in use.

 

Q2: Communication error with vehicle ECU?

Please confirm:

    Whether diagnostic connector is correctly connected.
    Whether ignition switch is ON.
    If all checks are normal, send vehicle year, make, model and VIN number to

us using Feedback feature.

 

Q3: Failed to enter into vehicle ECU system?

Please confirm:

    Whether the vehicle is equipped with this system.
    Whether the VCI dongle is correctly connected.
    Whether ignition switch is ON.
    If all checks are normal, send vehicle year, make, model and VIN number to

us using Feedback feature.

 

Q4: How to reset the tablet?

Resetting may cause data loss. Before doing so, please make sure important data

and information has been backed up.

Do the following to reset the tablet:

    Tap “Settings” -> “Back & Reset”.
    Tap “Factory data reset”.
    Tap “Reset tablet”.
    Tap “Clear all data” to start resetting until the tool automatically reboots.

 

Q5: How to download the X-431 PRO3 V4.0 App after resetting the tablet?

Important Message: Before registration, please make sure the network is properlyconnected.

After the tablet has been successfully reset, follow the steps below to download the App:

    Launch the browser and the default official Launch website opens (If a blank page pops up, just type in www.x431.com in the input bar).
    Tap “Login”, input the username and password and tap “Log In.”
    Make sure that the serial number is correct, tap “APP application program” and tap the Download icon to start downloading.
    After the download is complete, follow the on-screen instructions to install it.

5.After installation, use the existing username and password to login and go to update center to download the diagnostic software.

 

Q6: What to do if the language of vehicle diagnostic software does not match the system language?

English is the default system language of the tool. After the system language is set to the preference language, please go to the update center to download the vehicle diagnostic software of the corresponding language.

If the downloaded diagnostic software is still displayed in English, it indicates that the software of the current language is under development.

 

Q7: How to retrieve the login password?

Please follow below steps to proceed in case you forgot the login password:

    Tap the application icon on the home screen to launch it.
    Tap [Login] button on the upper right corner of the screen.
    Tap “Retrieve password”.
    Input product S/N and follow the on-screen prompts to retrieve the password.

Original Launch X431 Tool:https://www.obd2.ltd/goods-129-Launch-X431-Pro3S-Plus-HdIII-HD3-Car-and-Truck-Full-System-Diagnostic-Tool.html

How to Update Autel MaxiIM IM608 Software

Autel IM608 Update application allows you to download the latest released software.
The updates can improve the MaxiIM applications� capabilities, typically by adding new tests, new models, or enhanced applications to the database. The Display Tablet automatically searches for available updates for all of the MaxiIM software when it is connected to the internet. Any updates that are found can be downloaded and installed on the device. This section describes installing an update to the MaxiIM System. A notification message displays if an update is available when the Notifications Center function is enabled in the Settings application.

1. Make sure the Display Tablet is connected to a power source with stable access to the internet.
2. Tap the Update application button from the MaxiIM Job Menu; or tap the update notification message when received one; or tap the Update icon on Vehicle Menu in Diagnostics application. The Update application screen displays.
3. Check all available updates:
--If you decide to update all the items of IMMO software, select IMMO Tab and then tap the Update All button; if you want to update all items of diagnostic software, select Diagnose Tab and then tap the Update All button.
-- If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).
4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.
5. When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

This article is going to show you how to reset and program a used EGS transmission after a transmission swap.

Model:

BMW X3 2015 CAS4

Tool:

Autel MaxiIM IM608

Purpose:

Reset EGS EEPROM and make it back to the factory settings

Procedure:

Turn on Autel IM608, go to

IMMO>>BMW>>Smart selection>>EGS transmission system

Check “EWS_EGS Status”, and the authorization fails.

Go to “EGS Reset”.

Notes. Must have strong Wi-Fi connection and stable 13v+ power.

Download virgin file.

Backup code failed. Just continue because we could reprogram it via software update.

Have to wait for it to reset 3 parts.

EGS reset succeeds.

To check the sync of CAS module and EGS module.

Turn off the ignition for a while, and then turn it on again.

Click “EWS_EGS Status” to check.

EGS is unlocked.

We have reset EGS, so we can change gears.

Then all we need to do is coding, and then we could use the car normally.

Alright, that’s how we reset a used EGS using Autel IM608 Programmer.

 The VAS 6154diagnostic tool can be used on all 2000+ VW Audi Skoda vehicles including NEW AND FUTURE MODELS in production via wireless network. Here we have collected the most frequently asked questions from customers and offered the corresponding answers.

VAS6154 Diagnostic Tool  Wireless Download Install License

Q1: The 16 & 19 files in the CD come with VAS6154 have been lost, where to download the software?

A1: Free download from these tested links:

ODIS 5.15: https://share.weiyun.com/5QR2p9C (password: stbtl4)

ODIS 5.16 (latest) : https://share.weiyun.com/5UICOap password: kl3nxz)

Q2: Which operation system should I install  VAS6154 software on? Can I install Audi, VW and Skoda software at the same computer?

A2: Win7 or Win 10 is ok. You can install the car brands software above at the same computer.

Q3: When I install software for my VAS6154, it prompts there is a virus in it, how to do?

A3: Please disable the anti-virus software.

Q4: How do i bypass windows defender in windows 10 to install ODIS software for VAS6154?

A4: It’s easy to do. Just close or uninstall anti-virus software.

Q5: Does ODIS software come with ODIS engineering software or only ODIS service?

A5: Both have.

Q6: I have original factory VAS 6154 account, can I program key online?

A6: Yes, you can.

Q7: It prompts the license of VAS 6154 has expired as shown in the picture below.

Vas 6154 Wireless Download Install License Faqs 2

A7: Please check the system date on your computer and adjust it forward.

For example, the expiration time is 1st January, 2020, and you can change the date to any month in 2019.

Q8: Does VAS 6154 support online coding function?

A8: Yes, it does.

Q9: Is it possible to use VAS 6154 for Seat?

A9: No, it isn’t. It’s better to use VAS 5054A.

Q10 Can VAS6154 program Passat TDI SEL 2014 key?

A10: Yes, it can.

To be continued…